Tecan uses cookies to improve our website. By continuing to browse our website, you accept our cookie policy.
The Freedom EVO series is one of the most popular and reliable systems in the market, with more than 5,000 systems installed worldwide. The upgradeable Freedom EVO platform can evolve with your changing application needs, making your initial investment even more valuable.
This proven platform enables you to create your system according to your specific needs with the help of our automation specialists, or to select a preconfigured automation solution for your application.
 |
We are proud to announce that Tecan Freedom EVO was granted the Bronze Seal of Quality for consistently receiving multiple positive reviews. |
The Freedom EVO® series offers four different worktable capacities (75, 100, 150 and 200 cm) each with building-block modularity that brings precision, reliable liquid handling and easy-to-use robotics.
The interlocking shields ensure operator and process safety by protecting the work area and preventing unintended interruptions. The system can be easily paused by the operator, allowing the work area to be accessed at any time.
The integrated status lamp clearly shows the instrument status, allowing the user to see at a glance if the system is working (green lamp) or requires manual input or assistance (red lamp).
Samples are not always in perfect condition for pipetting, and manual handling errors can easily occur when loading samples and reagents onto the workstation.
To minimize the risk of these errors affecting your liquid handling processes, the Freedom EVO® has a number of built-in process security features, allowing early identification of anomalies and immediate, automated corrective actions.
Identifying and correcting issues early is not only critical for a uniform output, it also reduces the risk of sample contamination and supports regulatory compliance, helping you to save time, money and resources for optimum efficiency.
1 - Work area access protection
2 - Confirmation of tip mounting
3 - Liquid level detection (LLD)
4 - Pressure Monitored Pipetting™ (PMP)
5 - Barcode reading
6 - Plate grip sensing
7 - Diluter obstruction sensing
8 - Incubation control
9 - Safe pathways
10 - Real-time status checks
Base Plate for Te-Shake™, Front
Base plate to mount one or two Te-Shake™ base units (30042870) in front area of the worktable (normal position). Requires 6 worktable grids
Disposable Tips Carrier, 3 Position, Flat
Disposable Tip Carrier, 3 positions, flat, landscape, immobile and not compatible with PosID™. If using the waste chute (30097480) only 2 positions..
Disposable Tip Carrier, 3 positions, flat, landscape, immobile and not compatible with PosID™. If using the waste chute (30097480) only 2 positions will be available for disposable tips. This carrier can be used with all ANSI format tip boxes.
If using a Multi-Channel Arm™ (MCA) and multiple side by side tip boxes, no continuous individual access to a disposable tip stack is possible. Can also be used with ANSI format lab ware, but a dedicated microplate carrier is recommended due to better cLLD (capacitive liquid level detection) signal.
This carrier is recommended if larger devices in the back of a Freedom EVO™, for example if a PosID™ scanner is being used. Carrier is 6 worktable grids wide, however if using a Robotic Manipulator (RoMa) Arm with standard length fingers to access side by side tip boxes, 3 additional grids on either the right or left side will be required to move the tip box or access the bottom stack of tips.
Disposable Tips Carrier, 4 Position, Flat
Disposable Tip Carrier, 4 positions, flat, landscape, immobile and not compatible with PosID™. If using the waste chute (30097480) only 2 positions..
Disposable Tip Carrier, 4 positions, flat, landscape, immobile and not compatible with PosID™. If using the waste chute (30097480) only 2 positions will be available for MCA disposable tips, but still 3 positions available for Liquid Handling Arm™ (LiHa) tips. This carrier can be used with all ANSI format tip boxes.
If using a Multi-Channel Arm™ (MCA) and multiple side by side tip boxes, no continuous individual access to a disposable tip stack is possible. Can also be used with ANSI format lab ware, but a dedicated microplate carrier is recommended due to better cLLD (capacitive liquid level detection) signal.
This carrier is recommended if the densest possible storage of disposable tips of the same kind is required. Carrier is 6 worktable grids wide, however if using a Robotic Manipulator Arm™ (RoMa)
with standard length fingers to access side by side tip boxes, 3 additional grids on either the right or left side will be required to move the tip box or access the bottom stack of tips.
Disposable Tips Carrier, Wide Spacing, 3 Position, Flat
Disposable Tip Carrier, Wide Spacing, 3 positions, flat, landscape. Immobile and not compatible with PosID™. If using the waste chute (30097480)..
Disposable Tip Carrier, Wide Spacing, 3 positions, flat, landscape. Immobile and not compatible with PosID™. If using the waste chute (30097480) only 2 positions will be available for disposable tips.
This carrier can be used with all ANSI format tip boxes. Use this carrier for individual access to disposable tips racks with the MultiChannel Arm™ (MCA). This is important if using different tip types (e.g. 100 µL, 200 µL).
Can also be used with ANSI format lab ware, but a dedicated microplate carrier is recommended due to better cLLD (capacitive liquid level detection) signal. Carrier is 6 worktable grids wide, however if using a Robotic Manipulator Arm™ (RoMa) with standard length fingers to access side by side tip boxes, 3 additional grids on either the right or left side will be required to move the tip box or access the bottom stack of tips.
Fingers for Robotic Manipulator Arm™ (RoMa), Standard
Standard eccentric gripper fingers for Robotic Manipulator Arm™ (RoMa) to access tip boxes or microplates in a hotel, remove microplate leads, or tip..
Standard eccentric gripper fingers for Robotic Manipulator Arm™ (RoMa) to access tip boxes or microplates in a hotel, remove microplate leads, or tip box layer wafers..
Microplate Carrier, 3 Position, Standard Height
Microplate Carrier, 3-Position, standard height, landscape, immobile and not compatible with PosID™. All sites are accessible by a Liquid Handling..
Microplate Carrier, 3-Position, standard height, landscape, immobile and not compatible with PosID™. All sites are accessible by a Liquid Handling Arm™ (LiHa) or MultiChannel Arm™ (MCA). Carrier is 6 worktable grids wide.
Microplate Carrier, 4 Position, Flat
Microplate Carrier, 4-Position, flat, landscape, immobile and not compatible with PosID™. All four sites are accessible by a MultiChannel Arm™ MCA...
Microplate Carrier, 4-Position, flat, landscape, immobile and not compatible with PosID™. All four sites are accessible by a MultiChannel Arm™ MCA. Sites 1 and 4 cannot be accessed by all tips on an 8 channel Liquid Handling Arm™ (LiHa). Carrier is 6 worktable grids wide.
Microplate Carrier, 4 Position, Landscape, Standard Height
Microplate Carrier, 4-Position, standard height, landscape, immobile and not compatible with PosID™. All four sites are accessible by a MultiChannel..
Microplate Carrier, 4-Position, standard height, landscape, immobile and not compatible with PosID™. All four sites are accessible by a MultiChannel Arm™ (MCA). Sites 1 and 4 cannot be accessed by all tips on an 8 channel Liquid Handling Arm™ (LiHa). Carrier is 6 worktable grids wide.
Monitored Incubation Option MIO 37°C Shaking 4-Slot
Shaking 4 Slot Incubator with 35 mm slots (for 28 mm cell culture dishes) calibrated at 37°C. From ambient temperature + 5°C to 53°C. Includes cable..
Shaking 4 Slot Incubator with 35 mm slots (for 28 mm cell culture dishes) calibrated at 37°C. From ambient temperature + 5°C to 53°C. Includes cable and mounting plate. Robotic Manipulator Arm™ (RoMa) gripper fingers (10290247) are required. Object is 6 worktable grids wide.
Nest Adapter, 1 Microplate for Te-Shake™
Nest adapter for 1 microplate position for Te-Shake™, with hold down. Adapter is mounted directly on a single Te-Shake base unit (30042870). Usage..
Nest adapter for 1 microplate position for Te-Shake™, with hold down. Adapter is mounted directly on a single Te-Shake base unit (30042870). Usage of this adapter allows up to two Te-Shakes per base plate (10760722).
Nest Adapter, 2 Microplates for Te-Shake™
Nest adapter for 2 microplates on one Te-Shake™, with hold down on each site. Adapter is mounted directly on a single Te-Shake base unit (30042870)...
Nest adapter for 2 microplates on one Te-Shake™, with hold down on each site. Adapter is mounted directly on a single Te-Shake base unit (30042870). Usage of this adapter only allows one Te-Shake per base plate (10760722).
Spacer for Te-VacS™ 10.5mm - No. 7
Spacer for Te-VacS™ for use with solid phase extraction (SPE) applications. No.7, 10.5mm high
Spacer for Te-VacS™ 36.2mm - No. 6
Spacer for Te-VacS™ for use with solid phase extraction (SPE) applications. No.6, 36.2mm high
Te-Shake™ Microplate Shaker
Te-Shake™ Microplate Shaker, 100 – 1500 rpm, 24V, CAN-bus control. Includes communication cable.Requires mounting plate (10760722) to be placed on..
Te-Shake™ Microplate Shaker, 100 – 1500 rpm, 24V, CAN-bus control. Includes communication cable.
Requires mounting plate (10760722) to be placed on the worktable. Requires microplate nest adapter (30081239 or 10760725).
Vacuum Block for Te-VacS™ 62mm - Type C
Vacuum block for solid phase extraction (SPE). Tall - 62mm high, Material PMMA (non chemical resistant, transparent), Type C. For top skirted..
Vacuum block for solid phase extraction (SPE). Tall - 62mm high, Material PMMA (non chemical resistant, transparent), Type C. For top skirted cartridges. Comes with hard sealing gasket mounted and additional soft sealing gasket. Use soft sealing gasket for low pressure applications.
Waste Chute for Disposable Tips
Waste chute for disposable tips for disposable tip carriers. Compatible with all disposable tip formats, as well as nested tip layer wafers. ..
Waste chute for disposable tips for disposable tip carriers. Compatible with all disposable tip formats, as well as nested tip layer wafers. Requires compatible carrier, not included. Compatible with carriers 30052707, 30052708 or 30053521
None of our products is matching your search criteria.
If you would like to start a extended search in all our Shop products please click here.
For online Orders please use a Tablet or PC.
